Leave Room for the Last Seal
A pouch can look spot on when it's empty. Fill it on the packing bench and you might find the opening is too narrow to work with. The top can also be too short to sit neatly in the sealer. That's why it pays to work from a filled pouch before settling on the final size.
Think about how your team fills each pack and how it moves through the sealing step. If you fill by hand, check that you can hold the mouth open comfortably. If you use filling equipment, share the opening width and any limits on pouch height. A quick trial with a sample can save a lot of guesswork.
What are Custom Cannabis Mylar Bags? They're flexible pouches made for packing cannabis products. A cannabis Mylar bag can be sized to suit the contents and printed with your artwork. Film and closure options depend on what's going inside and how the pouch will be filled and sealed.
Flat and Stand-Up Pouches Made to Fit
Pick a Shape That Suits The Filled Pouch
Flat cannabis Mylar pouches have a slim profile that can work well for compact fills and packs that need to lie flat. Stand-up cannabis Mylar pouches have a bottom gusset that opens as the bag fills. If the pouch needs to stand upright, check how it sits at the actual fill level. The base needs enough room to open evenly.
Measure The Usable Space in Millimetres
Start with the inside width between the side seals. Then check the usable height from the base to just below the zip line on a zipped pouch. For a pouch without a zip, measure up to the area set aside for the top seal. Note the opening width separately so your team can check the fit against its filling setup.
The best Mylar bags for your product are the ones that fit well and seal neatly on the packing bench. Start with the amount you'll pack and leave enough room at the top to get a clean seal.
Cannabis Mylar Pouch Size Guide
Fine Packaging can make all five pouch sizes listed below. Use the nominal fill weight as a guide and check the fit with your product before confirming your order.
| Nominal Fill Weight |
Pouch Face Size (W × H) |
Folded Bottom Gusset |
| 1 g |
80 × 100 mm |
25 + 25 mm |
| 3.5 g |
102 × 127 mm |
25 + 25 mm |
| 7 g |
102 × 152 mm |
30 + 30 mm |
| 14 g |
127 × 202 mm |
30 + 30 mm |
| 28 g |
152 × 228 mm |
35 + 35 mm |
The minimum order is 500 bags.
Note: Check the usable space between the side seals and leave enough room above the fill line for the zip and top seal. Share your target fill weight and preferred measurements with Fine Packaging so we can confirm a custom size for your pack.
Barrier Films and Closure Options
Match The Film to The Job
If you're comparing high-barrier cannabis Mylar pouches, ask for the specification sheet for the proposed laminate. Check the stated oxygen and water vapour transmission rates when those measurements matter for your product. Share any performance targets and tell us whether the pouch needs to block light. We can then discuss which film structure to quote for your job.
Cannabis Mylar Pouch Materials
| Material |
Typical Role in the Pouch |
| MOPP |
Matte outer film for a low-shine finish. |
| BOPP |
Outer film that can carry printed artwork. |
| Metallised PET (VMPET) |
Barrier layer that helps limit exposure to light and moisture. |
| Polyethylene (PE) |
Inner layer that allows the pouch to be heat sealed. |
| Aluminium foil |
Barrier layer that blocks light and helps limit oxygen and moisture transmission. |
Note: Fine Packaging confirms the layer combination and available barrier data with your quote.
Plan the Opening and The First Seal
Resealable cannabis Mylar bags use a zip to close the pouch again after opening. With heat-sealable cannabis Mylar bags, the top of the pouch is sealed after filling. Both features can sit on the same design if there's enough room above the zip. A tear notch can give users a starting point when they first open the pack.
If your brief calls for child-resistant cannabis Mylar bags, share the test evidence you need for the finished pouch when requesting a quote. We can review your brief against the available pouch and closure options.
Custom Printing and Space for Product Labels
Set Up The Artwork Around The Pouch Layout
With custom printed cannabis Mylar bags, check where the side seals and gusset fall before placing your logo. Keep small text away from folds and leave clear space for product labels and batch details. If a batch code is added after filling, mark the spot on the proof and check that the area stays flat enough for your coding setup.
Matte gives the artwork a softer look. Gloss gives the surface more shine. If your team applies labels after the pouches arrive, tell us what label stock you use and request a sample in the proposed finish. That gives you something to test before approving the full print run.
Check The Proof at Actual Size
Print the artwork proof at full size and fold it along the guide lines. This gives you a better feel for how much space is left once the pouch takes shape. Check the back panel with the label in place and make sure the batch code area still has enough room. If you're ordering several sizes, review each layout individually. A label that sits neatly on the large pouch might run into a fold on the smaller one.
Get Your Pouch Right Before the Press Rolls
It helps to send a photo of your current pouch if you have one. Point out what works and what you'd change. If several products will share the same pouch size, tell us which one takes up the most room and how many artwork versions you need priced.
For wholesale cannabis Mylar bags, send Fine Packaging your preferred pouch dimensions and closure along with your artwork and quantity per design. If you're still working out the fit, tell us how you fill and seal each pouch. Email support@finepackaging.com.au for free quotes and free shipping across Australia.